Mon – Sat 08:30–18:30 · Production in Konya, Turkey
Öztek SoğutmaIndustrial
Chiller Manufacturer

How Does a Chiller Work? The Refrigeration Cycle

The vapour-compression cycle explained step by step, together with the water side and the controls.

How does a chiller work? Most chillers use the vapour-compression refrigeration cycle. In this cycle the refrigerant passes through four main components in turn and carries heat away from the process on every pass.

How Does a Chiller Work? The Refrigeration Cycle

The four steps of the cycle

  1. Evaporator: the water or water-glycol to be cooled flows on one side. Low-pressure refrigerant on the other side absorbs heat from it and evaporates; the water returns to the circuit chilled.
  2. Compressor: draws in the evaporated refrigerant and compresses it, raising its pressure and temperature.
  3. Condenser: the hot gas rejects its heat to the air (air-cooled) or to condenser water (water-cooled), condenses and becomes liquid.
  4. Expansion valve: lowers the pressure of the liquid refrigerant, which enters the evaporator again and the cycle repeats.

The water side

A pump sends the chilled water to the points of use, where it absorbs heat from machines, tanks or air handling units and returns warmer to the chiller. Many systems include a buffer tank, which evens out load changes and prevents the compressor from starting and stopping too often.

Control and protection

The controller monitors the leaving water temperature and switches compressors on and off accordingly. High and low pressure switches, a flow switch, freeze protection and a phase protection relay stop the unit safely under abnormal conditions.

Air-cooled or water-cooled?

An air-cooled chiller rejects heat directly to the outdoor air with fans and is simpler to install. A water-cooled chiller transfers heat to condenser water, which is then cooled by a cooling tower or a dry cooler. See our air-cooled vs water-cooled chiller guide.

WhatsApp